330 Signature Head Sink

[ChessieBay]

On our 2006 Signature 330 the faucet fixture in the head is corroded beyond repair, but removing the fixture for replacement seems impossible because access below the sink top is behind a single molded wall. I even removed the wall covering in the mid cabin to find access with no luck - just a solid fiberglass wall. Does anyone know how to access the faucet fixture for replacement ?

 

[Iggy]

I would scope out the wall the best I could. Than based upon that, I may cut though the wall and add a door.

Maybe dill a 1" hole to see in.

 

[Denny]

Somehow and some way they have mounted that sink with external screws or nuts and bolts. Sometimes they will put a molding or something around the cabinet to hide the screws, or one around the sink. Is there a door on the cabinet? If so get a flashlight and look at the inside walls and and floor. Is there a door in the floor in front of the sink? Sometimes they will secure it from there. It's like going on a scavenger hunt, good luck. Hope this helps.

 

[Iggy]

Which is my point to Denny's post. I would look and look from every which way. There must be a way to get back there or you make a way.

On my old Sig 290 I took out the locker at the foot of the mid cabin bed. That give me access to hoses and more. That I thought I could never reach. You just need to probe and see what can be done.