Should you experiance a drive that will not come off after shifting into fwd, removed the 6 nuts, and ram attachment you can try this.
Re-attach the rams, using a 4 -3/4 inch section of 1/2 or 3/4 inch gas pipe or equivilent ,place between the upper unit cap and the steering ring top.GENTLY apply ram pressure to force the unit out to break the seal.
If you need more ,lower unit ,insert shim material, raise GENTLY.
For Series`1 drives,change the top cap to a Alpha style.
Re-attach the rams, using a 4 -3/4 inch section of 1/2 or 3/4 inch gas pipe or equivilent ,place between the upper unit cap and the steering ring top.GENTLY apply ram pressure to force the unit out to break the seal.
If you need more ,lower unit ,insert shim material, raise GENTLY.
For Series`1 drives,change the top cap to a Alpha style.
Last edited: